|
Over 35
years of experience in |
NDT TRAINING A-Scan
Laboratories, Inc. is pleased to announce the following NDT training courses:
Also Available: Ultrasonic Level II – Immersion – 40 hour course specifically addressing requirements of ultrasonic immersion and through transmission inspection. Liquid Penetrant I/II (Spanish) (Call for Details) Magnetic Particle I/II (Spanish) (Call for Details) All Classes are also
available in evening sessions. Contact
us for details! |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Full Service Laboratory A-Scan Nondestructive
Testing, Inc. now provides the full spectrum of non-destructive testing
services including: NOW OFFERING Specializing in Composite
Inspection and Eddy
Current Inspection Training, Qualification |
Contact
us at: A-SCAN
Laboratories Inc. 24426
S. Main Suite 703 Carson, CA. 90745 Phone: (310) 834-9100 FAX: (310) 872-5477 e-mail:
a-scanlabs@a-scanlabs.com |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Inspection Services Level 3 Services Training Equipment Contact Us |
A-SCAN Nondestructive Testing, Inc. offers the highest level of experience and service for your NDT inspection needs. A-SCAN is the solution when you need:
A-Scan Labs offers state of the art ultrasonic
inspection capability specializing in the inspection of composite materials,
contact, immersion, through transmission, resonance.
Featuring:
Ultrasonic Immersion / Through transmission system –
24’ Long x 6’ wide x 30” deep Two search tubes.
Winspect
data acquisition
Advanced Signal Analysis
COMPOSITES WELDS CASTING
Norelco |
300kV |
7 mA |
Andrex |
250kV |
8mA |
Faxitron |
130kV |
5mA |
HP |
110kV |
5mA |
Excitation Modes:
Thermal
Vacuum
Rapid Reliable
Inspection of Composite and Bonded Structures
A-SCAN Laboratories can provide expert Level III assistance with your companies NDT procedures.
*
Create new NDT procedures for your
business
*
Review and approve your current inspection
procedures
*
Review and approve your subcontractors
and suppliers procedures
*
Provide expert consulting in
standardizing your procedures
* Auditing your own inspections
QUALIFICATION
A-SCAN Laboratories offers a full range of qualification services for your business.
*
SNT-TC-IA,
CP-189, NAS-410 compliance
*
Certification
written practice development
*
Certification
procedure review
*
Level I, II
and III examination administration including:
*
General
examinations
*
Specific
examinations
*
Practical
examinations
*
Flexible
examination schedule
* Special exam arrangements weekend and evenings available
Research
and Development
* Evaluation of new Inspection Technologies
* Advanced Signal Analysis
* Artificial Intelligence
* Advanced Ultrasonics and Eddy Current
A-SCAN Laboratories provides unmatched quality and
flexibility for non-destructive testing training.
Current Schedule
Wide range of NAS-410 and SNT-TC-1A classes
Training at your facility or ours
Flexible class size
Flexible scheduling
Large Comfortable Air Conditioned
Class Rooms
Special arrangements available for
weekend and evening classes
Specialized classes can be developed
to meet your training needs
Custom
classes available on request.
Introduction to NDT - Covers the fundamentals of nondestructive testing
methods including Eddy Current, Magnetic Particle, Liquid Penetrant,
Radiography, Ultrasonics and advanced test methods.
Eddy Current I - Introduction to electromagnetic theory,
instrumentation, probes, reference standards, defect detection, impedance
plane, conductivity and surface flaw inspection.
Eddy Current II - Advanced eddy current concepts, frequency selection,
second layer cracks, corrosion detection, eddy current C-scan, test setup,
evaluation and quality control
Eddy Current II (Aero) - Eddy current techniques required for
inspection of aircraft including cracks, fastener hole inspection, subsurface
cracks, corrosion and defect evaluation.
Eddy Current Level III – Preparation for Eddy Current Level III method
examination.
Eddy Current Conductivity Inspection - Introduction to eddy current conductivity
inspection of aluminum alloys. The class will cover basic theory, practical
application and demonstrations.
Hardness Inspection - Introduction to hardness testing theory, equipment,
specifications, and the Rockwell, Rockwell superficial and Brinell hardness
tests.
Magnetic Particle Inspection I – Introduction to magnetic particle testing
covering basic principles, test equipment, inspection applications and
discontinuity evaluation
Magnetic Particle Inspection II – Advanced magnetic particle theory, test
equipment, magnetization methods, inspection applications, discontinuity
evaluation and quality control.
Magnetic Particle Level III – Preparation for magnetic particle Level
III method examination.
Liquid Penetrant Inspection I – Introduction to penetrant inspection
theory, equipment, methods, inspection applications and evaluation of results.
Liquid Penetrant Inspection II – Advanced penetrant inspection theory,
equipment, inspection applications and evaluation of results and quality
control.
Liquid Penetrant Level III – Preparation for liquid penetrant Level
III method examination.
Radiography Level I - Introduction to Radiography, basic principles, X-rays,
gamma rays, equipment, film, processing, radiation safety, defect detection,
evaluation.
Radiography Level II – Gamma radiography, film radiography, real-time
radiography, film interpretation, material processing, quality control, codes,
standards, specifications.
Radiography Level III – Preparation for radiography Level III method
examination.
Digital Radiography Level I – Introduction to digital radiography
including digital detector arrays (DDA), computed radiography (CR), computer tomography
(CR) and advantages and limitations of each technique, introduction to image
processing.
Digital Radiography Level II DDA – In depth presentation of DDA panels,
panel design considerations, process controls, imaging processing including
window level and width, filters.
Digital Radiography Level II CR – In depth presentation of Computed
radiography systems, scanners, imaging plates, process controls, imaging
processing including window level and width, filters.
Digital Radiography Transition – Transitional course for those previously
certified for film radiography. Introduction to digital radiography including
digital detector arrays (DDA), computed radiography (CR), computer tomography
(CR), process controls, imaging processing including window level and width,
filters.
Laser Shearography Level I – Introduction to laser shearography
including advantages, limitations, applications, basic shearography inspection
methods and laser safety.
Laser Shearography Level II - Laser operation, shearography and
holography theory, excitation methods, NDT procedure development, inspection of
aircraft structures, laser safety.
Ultrasonic Level I - Introduction to Ultrasonics, basic principles,
instrumentation, probes, reference standards, test methods, defect detection,
evaluation, thickness measurement.
Ultrasonic Level II - Covers advanced ultrasonic theory, contact testing,
A-scan, B-scan, shear wave, longitudinal wave and test interpretation.
Ultrasonic Level II-C- Covers C-scan, F-scan, Immersion testing, Squirter /
Bubbler systems, computer based ultrasonics, and test interpretation.
Ultrasonic Level III – Preparation for Ultrasonic Level III method
examination.
Inspection of Aerospace Composites – Overview of aerospace composite
structures and available and recommended methods of nondestructive inspection.
Ultrasonic Inspection of Composites - Covers aircraft composite structures
(honeycomb, laminate, adhesive bonded, co-cured), instruments, transducers,
defect detection and evaluation and reference standards.
Level III Basic – Preparation for Level III Basic examination.
TRAINING COURSE |
START DATE |
FINISH DATE |
DURATION |
START TIME |
STOP TIME |
PREREQUISITE |
COST |
Digital Radiography Level I |
1/6/2020 |
1/10/2020 |
40 Hours |
8:00 AM |
4:00 PM |
UT-1 |
$1,400.00 |
Film Radiography Level I |
1/13/2020 |
1/17/2020 |
40 Hours |
8:00 AM |
4:00 PM |
None |
$1,400.00 |
Film Radiography Level II |
1/20/2020 |
1/24/2020 |
40 Hours |
8:00 AM |
4:00 PM |
RTF-1 |
$1,400.00 |
Radiation Health and Safety |
1/27/2020 |
1/31/2020 |
40 Hours |
8:00 AM |
4:00 PM |
None |
$1,400.00 |
Liquid Penetrant Level I/II NAS-410 |
2/3/2020 |
2/6/2020 |
32 Hours |
8:00 AM |
4:00 PM |
None |
$1,200.00 |
Magnetic Particle Level I/II NAS-410 |
2/10/2020 |
2/13/2020 |
32 Hours |
8:00 AM |
4:00 PM |
None |
$1,200.00 |
Eddy Current Level I |
2/17/2020 |
2/21/2020 |
40 Hours |
8:00 AM |
4:00 PM |
None |
$1,400.00 |
Eddy Current Level II |
2/24/2020 |
2/28/2020 |
40 Hours |
8:00 AM |
4:00 PM |
ET-1 |
$1,400.00 |
Ultrasonic Level I |
3/2/2020 |
3/6/2020 |
40 Hours |
8:00 AM |
4:00 PM |
None |
$1,400.00 |
Ultrasonic Level II |
3/9/2020 |
3/13/2020 |
40 Hours |
8:00 AM |
4:00 PM |
None |
$1,400.00 |
Digital Radiography Level I |
3/16/2020 |
3/20/2020 |
40 Hours |
8:00 AM |
4:00 PM |
UT-1 |
$1,400.00 |
Film Radiography Level I |
3/23/2020 |
3/27/2020 |
40 Hours |
8:00 AM |
4:00 PM |
None |
$1,400.00 |
Film Radiography Level II |
3/30/2020 |
4/3/2020 |
40 Hours |
8:00 AM |
4:00 PM |
RTF-1 |
$1,400.00 |
Liquid Penetrant Level I/II NAS-410 |
4/6/2020 |
4/9/2020 |
32 Hours |
8:00 AM |
4:00 PM |
None |
$1,200.00 |
Magnetic Particle Level I/II NAS-410 |
4/13/2020 |
4/16/2020 |
32 Hours |
8:00 AM |
4:00 PM |
None |
$1,200.00 |
Eddy Current Level I |
4/20/2020 |
4/24/2020 |
40 Hours |
8:00 AM |
4:00 PM |
None |
$1,400.00 |
Eddy Current Level II |
4/27/2020 |
5/1/2020 |
40 Hours |
8:00 AM |
4:00 PM |
ET-1 |
$1,400.00 |
Radiation Health and Safety |
5/4/2020 |
5/8/2020 |
40 Hours |
8:00 AM |
4:00 PM |
None |
$1,400.00 |
Ultrasonic Level I |
5/11/2020 |
5/15/2020 |
40 Hours |
8:00 AM |
4:00 PM |
None |
$1,400.00 |
Ultrasonic Level II |
5/18/2020 |
5/22/2020 |
40 Hours |
8:00 AM |
4:00 PM |
UT-1 |
$1,400.00 |
Film Radiography Level I |
6/1/2020 |
6/5/2020 |
40 Hours |
8:00 AM |
4:00 PM |
None |
$1,200.00 |
Film Radiography Level II |
6/8/2020 |
6/12/2020 |
40 Hours |
8:00 AM |
4:00 PM |
RTF-1 |
$1,200.00 |
Radiation Health and Safety |
6/15/2020 |
6/19/2020 |
40 Hours |
8:00 AM |
4:00 PM |
None |
$1,400.00 |
Eddy Current Level I |
6/22/2020 |
6/26/2020 |
40 Hours |
8:00 AM |
4:00 PM |
None |
$1,400.00 |
Eddy Current Level 2 |
6/29/2020 |
7/3/2020 |
40 Hours |
8:00 AM |
4:00 PM |
ET-1 |
$1,400.00 |
Liquid Penetrant Level I/II NAS-410 |
7/6/2020 |
7/9/2020 |
32 Hours |
8:00 AM |
4:00 PM |
None |
$1,200.00 |
Magnetic Particle Level I/II NAS-410 |
7/13/2020 |
7/16/2020 |
32 Hours |
8:00 AM |
4:00 PM |
None |
$1,200.00 |
Eddy Current Level I |
7/20/2020 |
7/24/2020 |
40 Hours |
8:00 AM |
4:00 PM |
None |
$1,400.00 |
Eddy Current Level II |
7/27/2020 |
7/31/2020 |
40 Hours |
8:00 AM |
4:00 PM |
ET-1 |
$1,400.00 |
Radiation Health and Safety |
8/3/2020 |
8/7/2020 |
40 Hours |
8:00 AM |
4:00 PM |
None |
$1,400.00 |
Ultrasonic Level I |
8/10/2020 |
8/14/2020 |
40 Hours |
8:00 AM |
4:00 PM |
None |
$1,400.00 |
Ultrasonic Level II |
8/17/2020 |
8/21/2020 |
40 Hours |
8:00 AM |
4:00 PM |
UT-1 |
$1,400.00 |
Film Radiography Level I |
8/24/2020 |
8/28/2020 |
40 Hours |
8:00 AM |
4:00 PM |
None |
$1,200.00 |
Film Radiography Level II |
8/31/2020 |
9/4/2020 |
40 Hours |
8:00 AM |
4:00 PM |
RTF-1 |
$1,200.00 |
Radiation Health and Safety |
9/14/2020 |
9/18/2020 |
40 Hours |
8:00 AM |
4:00 PM |
None |
$1,400.00 |
Liquid Penetrant Level I/II NAS-410 |
9/21/2020 |
9/24/2020 |
32 Hours |
8:00 AM |
4:00 PM |
None |
$1,200.00 |
Magnetic Particle Level I/II NAS-410 |
9/28/2020 |
10/1/2020 |
32 Hours |
8:00 AM |
4:00 PM |
None |
$1,200.00 |
Eddy Current Level I |
10/5/2020 |
10/9/2020 |
40 Hours |
8:00 AM |
4:00 PM |
None |
$1,400.00 |
Eddy Current Level II |
10/12/2020 |
10/16/2020 |
40 Hours |
8:00 AM |
4:00 PM |
ET-1 |
$1,400.00 |
Ultrasonic Level I |
10/19/2020 |
10/23/2020 |
40 Hours |
8:00 AM |
4:00 PM |
None |
$1,400.00 |
Ultrasonic Level II |
10/26/2020 |
10/30/2020 |
40 Hours |
8:00 AM |
4:00 PM |
UT-1 |
$1,400.00 |
Digital Radiography Level I |
11/2/2020 |
11/6/2020 |
40 Hours |
8:00 AM |
4:00 PM |
None |
$1,600.00 |
Film Radiography Level I |
11/9/2020 |
11/13/2020 |
40 Hours |
8:00 AM |
4:00 PM |
None |
$1,400.00 |
Film Radiography Level II |
11/16/2020 |
11/20/2020 |
40 Hours |
8:00 AM |
4:00 PM |
RTF-1 |
$1,400.00 |
Magnetic Particle Level I/II NAS-410 |
11/30/2020 |
12/3/2020 |
32 Hours |
8:00 AM |
4:00 PM |
None |
$1,200.00 |
Eddy Current Level I |
12/7/2020 |
12/11/2020 |
40 Hours |
8:00 AM |
4:00 PM |
None |
$1,400.00 |
Contact us at:
A-SCAN
Laboratories,
Inc.
24426 S. Main Street, Suite 703
Carson, CA 90745
Fax: (310) 872-5477
Phone: (310) 834-9100
E-mail: a-scanlabs@a-scanlabs.com
Business Development Manager
(562) 480-7595